Mesh Class 
This is often called a facevertex mesh.
Namespace: Rhino.Geometry
The Mesh type exposes the following members.
Name  Description  

Mesh  Initializes a new empty mesh.  
Mesh(SerializationInfo, StreamingContext) 
Protected constructor for internal use.

Name  Description  

ComponentStates 
Gets access to the vertex hidden/visibility collection in this mesh.
This is a runtime property and it is not saved in the 3dm file.
 
DisjointMeshCount 
Gets the number of disjoint (topologically unconnected) pieces in this mesh.
 
Disposed 
Indicates if this object has been disposed or the
document it originally belonged to has been disposed.
(Inherited from CommonObject.)  
FaceNormals 
Gets access to the face normal collection in this mesh.
 
Faces 
Gets access to the mesh face list.
 
HasBrepForm 
Returns true if the Brep.TryConvertBrep function will be successful for this object
(Inherited from GeometryBase.)  
HasCachedTextureCoordinates 
Will return true if SetCachedTextureCoordinates has been called;
otherwise will return false.
 
HasUserData 
Gets true if this class has any custom information attached to it through UserData.
(Inherited from CommonObject.)  
IsClosed 
Gets a value indicating whether a mesh is considered to be closed (solid).
A mesh is considered solid when every mesh edge borders two or more faces.
 
IsDeformable 
true if object can be accurately modified with "squishy" transformations like
projections, shears, and nonuniform scaling.
(Inherited from GeometryBase.)  
IsDocumentControlled 
If true this object may not be modified. Any properties or functions that attempt
to modify this object when it is set to "IsReadOnly" will throw a NotSupportedException.
(Inherited from GeometryBase.)  
IsValid  Tests an object to see if it is valid. (Inherited from CommonObject.)  
Ngons 
Gets access to the mesh ngon list.
Ngons represent groups of Faces (triangles + quads). Faces are used to tessellate an Ngon internally. When a triangle or quad is referenced in the Ngon list, it is no longer visualized and conceived as a single entity, but takes part of the Ngon. If you need to get access to both Ngons and the faces that are not referenced by Ngons, that is, all polygons that are visible in the mesh, then use the GetNgonAndFacesEnumerable helper method.  
Normals 
Gets access to the vertex normal collection in this mesh.
 
ObjectType 
Useful for switch statements that need to differentiate between
basic object types like points, curves, surfaces, and so on.
(Inherited from GeometryBase.)  
PartitionCount 
Number of partition information chunks stored on this mesh based
on the last call to CreatePartitions
 
TextureCoordinates 
Gets access to the vertex texture coordinate collection in this mesh.
 
TopologyEdges 
Gets the MeshTopologyEdgeList object associated with this mesh.
This object stores edge connectivity.  
TopologyVertices 
Gets the MeshTopologyVertexList object associated with this mesh.
This object stores vertex connectivity and the indices of vertices that were unified while computing the edge topology.  
UserData 
List of custom information that is attached to this class.
(Inherited from CommonObject.)  
UserDictionary 
Dictionary of custom information attached to this class. The dictionary is actually user
data provided as an easy to use sharable set of information.
(Inherited from CommonObject.)  
UserStringCount 
Gets the amount of user strings.
(Inherited from GeometryBase.)  
VertexColors 
Gets access to the (optional) vertex color collection in this mesh.
 
Vertices 
Gets access to the vertices set of this mesh.

Name  Description  

Append 
Appends a copy of another mesh to this one and updates indices of appended mesh parts.
 
ClearSurfaceData 
Removes surface parameters, curvature parameters and surface statistics from the mesh.
 
ClearTextureData 
Removes all texture coordinate information from this mesh.
 
ClosestMeshPoint 
Gets the point on the mesh that is closest to a given test point. Similar to the
ClosestPoint function except this returns a MeshPoint class which includes
extra information beyond just the location of the closest point.
 
ClosestPoint(Point3d) 
Gets the point on the mesh that is closest to a given test point.
 
ClosestPoint(Point3d, Point3d, Double) 
Gets the point on the mesh that is closest to a given test point.
 
ClosestPoint(Point3d, Point3d, Vector3d, Double) 
Gets the point on the mesh that is closest to a given test point.
 
CollapseFacesByArea 
Collapses multiple mesh faces, with areas less than LessThanArea and greater than GreaterThanArea,
based on the principles found in Stan Melax's mesh reduction PDF,
see http://pomax.nihongoresources.com/downloads/PolygonReduction.pdf
 
CollapseFacesByByAspectRatio 
Collapses a multiple mesh faces, determined by face aspect ratio, based on criteria found in Stan Melax's polygon reduction,
see http://pomax.nihongoresources.com/downloads/PolygonReduction.pdf
 
CollapseFacesByEdgeLength 
Collapses multiple mesh faces, with greater/less than edge length, based on the principles
found in Stan Melax's mesh reduction PDF,
see http://pomax.nihongoresources.com/downloads/PolygonReduction.pdf
 
ColorAt(MeshPoint) 
Evaluate a mesh color at a set of barycentric coordinates.
 
ColorAt(Int32, Double, Double, Double, Double) 
Evaluate a mesh normal at a set of barycentric coordinates. Barycentric coordinates must
be assigned in accordance with the rules as defined by MeshPoint.T.
 
Compact 
Removes any unreferenced objects from arrays, reindexes as needed
and shrinks arrays to minimum required size.
 
ComponentIndex 
If this piece of geometry is a component in something larger, like a BrepEdge
in a Brep, then this function returns the component index.
(Inherited from GeometryBase.)  
ComputeAutoCreaseInformation 
Do not use this method.
Length: top.Mesh.Vertices.Count
 
ComputeThickness(IEnumerableMesh, Double) 
Compute thickness metrics for this mesh.
 
ComputeThickness(IEnumerableMesh, Double, CancellationToken) 
Compute thickness metrics for this mesh.
 
ComputeThickness(IEnumerableMesh, Double, Double, CancellationToken) 
Compute thickness metrics for this mesh.
 
ConstructConstObject 
Assigns a parent object and a subobject index to this.
(Inherited from CommonObject.)  
CopyFrom 
Copies mesh values into this mesh from another mesh.
 
CreateBooleanDifference 
Computes the solid difference of two sets of Meshes.
 
CreateBooleanIntersection 
Computes the solid intersection of two sets of meshes.
 
CreateBooleanSplit 
Splits a set of meshes with another set.
 
CreateBooleanUnion 
Computes the solid union of a set of meshes.
 
CreateContourCurves(Mesh, Plane) 
Constructs contour curves for a mesh, sectioned at a plane.
 
CreateContourCurves(Mesh, Point3d, Point3d, Double) 
Constructs contour curves for a mesh, sectioned along a linear axis.
 
CreateFromBox(BoundingBox, Int32, Int32, Int32) 
Constructs new mesh that matches a bounding box.
 
CreateFromBox(Box, Int32, Int32, Int32) 
Constructs new mesh that matches an aligned box.
 
CreateFromBox(IEnumerablePoint3d, Int32, Int32, Int32) 
Constructs new mesh from 8 corner points.
 
CreateFromBrep(Brep)  Obsolete.
Constructs a mesh from a brep.
 
CreateFromBrep(Brep, MeshingParameters) 
Constructs a mesh from a brep.
 
CreateFromClosedPolyline 
Attempts to create a Mesh that is a triangulation of a closed polyline.
 
CreateFromCone  Constructs a mesh cone  
CreateFromCurvePipe 
Constructs a new mesh pipe from a curve.
 
CreateFromCylinder  Constructs a mesh cylinder  
CreateFromLines 
Creates a mesh by analizing the edge structure that could result from the extraction
of edges from an original mesh.
 
CreateFromPlanarBoundary(Curve, MeshingParameters)  Obsolete.
Do not use this overload. Use version that takes a tolerance parameter instead.
 
CreateFromPlanarBoundary(Curve, MeshingParameters, Double) 
Attempts to construct a mesh from a closed planar curve.RhinoMakePlanarMeshes
 
CreateFromPlane 
Constructs a planar mesh grid.
 
CreateFromSphere 
Constructs a mesh sphere.
 
CreateFromTessellation 
Attempts to create a mesh that is a triangulation of a list of points, projected on a plane,
including its holes and fixed edges.
 
CreateIcoSphere 
Constructs a icospherical mesh. A mesh icosphere differs from a standard
UV mesh sphere in that it's vertices are evenly distributed. A mesh icosphere
starts from an icosahedron (a regular polyhedron with 20 equilateral triangles).
It is then refined by splitting each triangle into 4 smaller triangles.
This splitting can be done several times.
 
CreatePartitions 
In ancient times (or modern smartphone times), some rendering engines
were only able to process small batches of triangles and the
CreatePartitions() function was provided to partition the mesh into
subsets of vertices and faces that those rendering engines could handle.
 
CreatePatch 
Construct a mesh patch from a variety of input geometry.
 
CreateQuadSphere 
Constructs a quad mesh sphere. A quad mesh sphere differs from a standard
UV mesh sphere in that it's vertices are evenly distributed. A quad mesh sphere
starts from a cube (a regular polyhedron with 6 square sides).
It is then refined by splitting each quad into 4 smaller quads.
This splitting can be done several times.
 
CreateRefinedCatmullClarkMesh 
Instantiates a new mesh that represents a CatmullClark subdivision of the mesh.
 
CreateRefinedLoopMesh 
Instantiates a new mesh that represents a Loop subdivision of the mesh.
 
DestroyPartition 
Destroys mesh partition.
 
DestroyTopology 
Removes topology data, forcing all topology information to be recomputed.
 
DestroyTree 
Destroys the mesh vertex access tree.
 
Dispose 
Actively reclaims unmanaged resources that this instance uses.
(Inherited from CommonObject.)  
Dispose(Boolean) 
Overridden in order to destroy local display cache information
(Inherited from GeometryBase.)  
Duplicate 
Constructs a copy of this mesh.
This is the same as DuplicateMesh.
(Overrides GeometryBaseDuplicate.)  
DuplicateMesh  Constructs a copy of this mesh.
This is the same as Duplicate.
 
DuplicateShallow 
Constructs a light copy of this object. By "light", it is meant that the same
underlying data is used until something is done to attempt to change it. For example,
you could have a shallow copy of a very heavy mesh object and the same underlying
data will be used when doing things like inspecting the number of faces on the mesh.
If you modify the location of one of the mesh vertices, the shallow copy will create
a full duplicate of the underlying mesh data and the shallow copy will become a
deep copy.
(Inherited from GeometryBase.)  
EnsurePrivateCopy 
If you want to keep a copy of this class around by holding onto it in a variable after a command
completes, call EnsurePrivateCopy to make sure that this class is not tied to the document. You can
call this function as many times as you want.
(Inherited from CommonObject.)  
Equals  (Inherited from Object.)  
EvaluateMeshGeometry 
If the mesh has SurfaceParameters, the surface is evaluated at
these parameters and the mesh geometry is updated.
 
ExplodeAtUnweldedEdges 
Explode the mesh into submeshes where a submesh is a collection of faces that are contained
within a closed loop of "unwelded" edges. Unwelded edges are edges where the faces that share
the edge have unique mesh vertexes (not mesh topology vertexes) at both ends of the edge.
 
ExtendSelectionByEdgeRidge 
Suggests an extension of a selection set by using information related with topology and alignment.
 
ExtendSelectionByFaceLoop 
Suggests an extension of a face selection set by using information related with topology and alignment.
 
ExtractNonManifoldEdges 
Extracts, or removes, nonmanifold mesh edges.
 
FileHole 
Given a starting "naked" edge index, this function attempts to determine a "hole"
by chaining additional naked edges together until if returns to the start index.
Then it triangulates the closed polygon and either adds the faces to the mesh.
 
FillHoles 
Attempts to determine "holes" in the mesh by chaining naked edges together.
Then it triangulates the closed polygons adds the faces to the mesh.
 
Finalize 
Passively reclaims unmanaged resources when the class user did not explicitly call Dispose().
(Inherited from CommonObject.)  
Flip  Reverses the direction of the mesh.  
GetBoundingBox(Boolean) 
Boundingbox solver. Gets the world axis aligned boundingbox for the geometry.
(Inherited from GeometryBase.)  
GetBoundingBox(Plane) 
Aligned Boundingbox solver. Gets the plane aligned boundingbox.
(Inherited from GeometryBase.)  
GetBoundingBox(Transform) 
Aligned Boundingbox solver. Gets the world axis aligned boundingbox for the transformed geometry.
(Inherited from GeometryBase.)  
GetBoundingBox(Plane, Box) 
Aligned Boundingbox solver. Gets the plane aligned boundingbox.
(Inherited from GeometryBase.)  
GetCachedTextureCoordinates 
Call this method to get cached texture coordinates for a texture
mapping with the specified Id.
 
GetHashCode  (Inherited from Object.)  
GetNakedEdgePointStatus 
Returns an array of bool values equal in length to the number of vertices in this
mesh. Each value corresponds to a mesh vertex and is set to true if the vertex is
not completely surrounded by faces.
 
GetNakedEdges 
Returns all edges of a mesh that are considered "naked" in the
sense that the edge only has one face.
 
GetNgonAndFacesCount 
Retrieves the count of items that GetNgonAndFacesEnumerable will provide.
 
GetNgonAndFacesEnumerable 
Retrieves a complete enumerable, i.e., one that provides an iterator over every face that is present,
no matter if defined as a triangle, a quad, or a strictly overfoursided ngon.
 
GetObjectData 
Populates a System.Runtime.Serialization.SerializationInfo with the data needed to serialize the target object.
(Inherited from CommonObject.)  
GetOutlines(Plane) 
Constructs the outlines of a mesh projected against a plane.
 
GetOutlines(RhinoViewport) 
Constructs the outlines of a mesh. The projection information in the
viewport is used to determine how the outlines are projected.
 
GetOutlines(ViewportInfo, Plane) 
Constructs the outlines of a mesh.
 
GetPartition 
Retrieves a partition. See CreatePartitions(Int32, Int32) for details.
 
GetType  (Inherited from Object.)  
GetUnsafeLock 
Allows to obtain unsafe pointers to the underlying unmanaged data structures of the mesh.
 
GetUserString 
Gets user string from this geometry.
(Inherited from GeometryBase.)  
GetUserStrings 
Gets a copy of all (user key string, user value string) pairs attached to this geometry.
(Inherited from GeometryBase.)  
HealNakedEdges 
Attempts to "heal" naked edges in a mesh based on a given distance.
First attempts to move vertexes to neighboring vertexes that are within that
distance away. Then it finds edges that have a closest point to the vertex within
the distance and splits the edge. When it finds one it splits the edge and
makes two new edges using that point.
 
IsManifold 
Gets a value indicating whether or not the mesh is manifold.
A manifold mesh does not have any edge that borders more than two faces.
 
IsPointInside 
Determines if a point is inside a solid mesh.
 
IsValidWithLog 
Determines if an object is valid. Also provides a report on errors if this
object happens not to be valid.
(Inherited from CommonObject.)  
MakeDeformable 
If possible, converts the object into a form that can be accurately modified
with "squishy" transformations like projections, shears, an nonuniform scaling.
(Inherited from GeometryBase.)  
MemberwiseClone  (Inherited from Object.)  
MemoryEstimate 
Computes an estimate of the number of bytes that this object is using in memory.
(Inherited from GeometryBase.)  
NonConstOperation  Clear local cache on non const calls (Overrides GeometryBaseNonConstOperation.)  
NormalAt(MeshPoint) 
Evaluate a mesh normal at a set of barycentric coordinates.
 
NormalAt(Int32, Double, Double, Double, Double) 
Evaluate a mesh normal at a set of barycentric coordinates. Barycentric coordinates must
be assigned in accordance with the rules as defined by MeshPoint.T.
 
Offset(Double) 
Makes a new mesh with vertices offset a distance in the opposite direction of the existing vertex normals.
Same as Mesh.Offset(distance, false)
 
Offset(Double, Boolean) 
Makes a new mesh with vertices offset a distance in the opposite direction of the existing vertex normals.
Optionally, based on the value of solidify, adds the input mesh and a ribbon of faces along any naked edges.
If solidify is false it acts exactly as the Offset(distance) function.
 
OnSwitchToNonConst 
Performs some memory cleanup if necessary
(Overrides GeometryBaseOnSwitchToNonConst.)  
PointAt(MeshPoint) 
Evaluate a mesh at a set of barycentric coordinates.
 
PointAt(Int32, Double, Double, Double, Double) 
Evaluates a mesh at a set of barycentric coordinates. Barycentric coordinates must
be assigned in accordance with the rules as defined by MeshPoint.T.
 
PullPointsToMesh 
Pulls a collection of points to a mesh.
 
RebuildNormals 
Removes mesh normals and reconstructs the face and vertex normals based
on the orientation of the faces.
 
Reduce(ReduceMeshParameters)  Reduce polygon count  
Reduce(Int32, Boolean, Int32, Boolean) 
Reduce polygon count
 
Reduce(Int32, Boolean, Int32, Boolean, CancellationToken, IProgressDouble, String)  Reduce polygon count  
ReleaseUnsafeLock 
Updates the Mesh data with the information that was stored via the MeshUnsafeLock.
 
Rotate 
Rotates the object about the specified axis. A positive rotation
angle results in a counterclockwise rotation about the axis (right hand rule).
(Inherited from GeometryBase.)  
Scale 
Scales the object by the specified factor. The scale is centered at the origin.
(Inherited from GeometryBase.)  
SetCachedTextureCoordinates 
Set cached texture coordinates using the specified mapping.
 
SetTextureCoordinates 
Set texture coordinates using given mapping and applying given transform.
Set lazy to false to generate texture coordinates right away.
 
SetUserString 
Attach a user string (key,value combination) to this geometry.
(Inherited from GeometryBase.)  
Smooth(Double, Boolean, Boolean, Boolean, Boolean, SmoothingCoordinateSystem) 
Smooths a mesh by averaging the positions of mesh vertices in a specified region.
 
Smooth(Double, Boolean, Boolean, Boolean, Boolean, SmoothingCoordinateSystem, Plane) 
Smooths a mesh by averaging the positions of mesh vertices in a specified region.
 
SolidOrientation 
Determines orientation of a "solid" mesh.
 
Split(Mesh) 
Split a mesh with another mesh.
 
Split(IEnumerableMesh) 
Split a mesh with a collection of meshes.
 
Split(Plane) 
Split a mesh by an infinite plane.
 
SplitDisjointPieces 
Splits up the mesh into its unconnected pieces.
 
ToString  (Inherited from Object.)  
Transform 
Transforms the geometry. If the input Transform has a SimilarityType of
OrientationReversing, you may want to consider flipping the transformed
geometry after calling this function when it makes sense. For example,
you may want to call Flip() on a Brep after transforming it.
(Inherited from GeometryBase.)  
Translate(Vector3d)  Translates the object along the specified vector. (Inherited from GeometryBase.)  
Translate(Double, Double, Double)  Translates the object along the specified vector. (Inherited from GeometryBase.)  
UnifyNormals 
Attempts to fix inconsistencies in the directions of mesh faces in a mesh. This function
does not modify mesh vertex normals, it rearranges the mesh face winding and face
normals to make them all consistent. Note, you may want to call Mesh.Normals.ComputeNormals()
to recompute vertex normals after calling this functions.
 
UnifyNormals(Boolean) 
Attempts to fix inconsistencies in the directions of mesh faces in a mesh. This function
does not modify mesh vertex normals, it rearranges the mesh face winding and face
normals to make them all consistent. Note, you may want to call Mesh.Normals.ComputeNormals()
to recompute vertex normals after calling this functions.
 
Unweld 
Makes sure that faces sharing an edge and having a difference of normal greater
than or equal to angleToleranceRadians have unique vertexes along that edge,
adding vertices if necessary.
 
Volume 
Removes any unreferenced objects from arrays, reindexes as needed
and shrinks arrays to minimum required size.
 
Weld 
Makes sure that faces sharing an edge and having a difference of normal greater
than or equal to angleToleranceRadians share vertexes along that edge, vertex normals
are averaged.
 
WithDisplacement 
Constructs new mesh from the current one, with displacement applied to it.
 
WithEdgeSoftening 
Constructs new mesh from the current one, with edge softening applied to it.
 
WithShutLining 
Constructs new mesh from the current one, with shut lining applied to it.
