If an object passes the geometry TYPE filter, then the geometry ATTRIBUTE filter is applied.
Enum values
| Name | Value | Description |
|---|---|---|
| WireCurve | 1 | 3d wire curve If you want to accept only wire or edge curves, then specify wire_curve or edge_curve, otherwise both wire and edge curves will pass the attribute filter. |
| EdgeCurve | 2 | 3d curve of a surface edge If you want to accept only wire or edge curves, then specify wire_curve or edge_curve, otherwise both wire and edge curves will pass the attribute filter. |
| ClosedCurve | 4 | Closed Curves and Edges are acceptable If you want to accept only closed or open curves, then specify either closed_curve or open_curve. Otherwise both closed and open curves will pass the attribute filter. |
| OpenCurve | 8 | Open Curves and Edges are acceptable If you want to accept only closed or open curves, then specify either closed_curve or open_curve. Otherwise both closed and open curves will pass the attribute filter. |
| SeamEdge | 16 | seam edges are acceptable attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| ManifoldEdge | 32 | edges with 2 different surfaces pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| NonmanifoldEdge | 64 | edges with 3 or more surfaces pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| MatedEdge | 112 | any mated edge passes attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| SurfaceBoundaryEdge | 128 | boundary edges on surface sides pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| TrimmingBoundaryEdge | 256 | boundary edges that trim a surface pass attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| BoundaryEdge | 384 | ant boundary edge passes attributes of acceptable trimming edge objects (associated with an ON_BrepTrim). If none of these attributes are explicitly specified, then any kind of trimming edge will pass the attribute filter. |
| ClosedSurface | 512 | If you want to accept only closed or open surfaces, then specify either closed_surface or open_surface. Otherwise both closed and open surfaces will pass the attribute filter. |
| OpenSurface | 1024 | If you want to accept only closed or open surfaces, then specify either closed_surface or open_surface. Otherwise both closed and open surfaces will pass the attribute filter. |
| TrimmedSurface | 2048 | If you want to accept only trimmed or untrimmed surfaces, then specify either trimmed_surface or untrimmed_surface. Otherwise both trimmed and untrimmed surfaces will pass the attribute filter. |
| UntrimmedSurface | 4096 | If you want to accept only trimmed or untrimmed surfaces, then specify either trimmed_surface or untrimmed_surface. Otherwise both trimmed and untrimmed surfaces will pass the attribute filter. |
| SubSurface | 8192 | If you want to accept only sub-surfaces of (multi-surface) polysurface, then specify sub_surface. If you do not want to accept sub-surfaces, then specify top_surface. Otherwise sub-surfaces and top surfaces will pass the attribute filter. |
| TopSurface | 16384 | If you want to accept only sub-surfaces of (multi-surface) polysurface, then specify sub_surface. If you do not want to accept sub-surfaces, then specify top_surface. Otherwise sub-surfaces and top surfaces will pass the attribute filter. |
| ManifoldPolysrf | 32768 | If you want to accept only manifold or non-manifold polysurfaces, then specify manifold_polysrf or nonmanifold_polysrf. Otherwise both manifold and non-manifold polysurfaces will pass the attribute filter. |
| NonmanifoldPolysrf | 65536 | If you want to accept only manifold or non-manifold polysurfaces, then specify manifold_polysrf or nonmanifold_polysrf. Otherwise both manifold and non-manifold polysurfaces will pass the attribute filter. |
| ClosedPolysrf | 131072 | If you want to accept only closed or open polysurfaces, then specify either closed_polysrf or open_polysrf. Otherwise both closed and open polysurfaces will pass the attribute filter. |
| OpenPolysrf | 262144 | If you want to accept only closed or open polysurfaces, then specify either closed_polysrf or open_polysrf. Otherwise both closed and open polysurfaces will pass the attribute filter. |
| ClosedMesh | 524288 | If you want to accept only closed or open meshes, then specify either closed_mesh or open_mesh. Otherwise both closed and open meshes will pass the attribute filter. |
| OpenMesh | 1048576 | If you want to accept only closed or open meshes, then specify either closed_mesh or open_mesh. Otherwise both closed and open meshes will pass the attribute filter. |
| BoundaryInnerLoop | 2097152 | all trimming edges are boundary edges. |
| MatedInnerLoop | 4194304 | all trimming edges are mated. |
| InnerLoop | 6291456 | any inner loop is acceptable. |
| BoundaryOuterLoop | 8388608 | all trimming edges are boundary edges. |
| MatedOuterLoop | 16777216 | all trimming edges are mated. |
| OuterLoop | 25165824 | any outer loop is acceptable. |
| SpecialLoop | 33554432 | slit, curve-on-surface, point-on-surface, etc. |
| AcceptAllAttributes | 4294967295 |