GH_Component.GH_InputParamManager

GH_Component.GH_ParamManagerReferences
protected class GH_Component.GH_InputParamManager : GH_Component.GH_ParamManager
This class is used during Component construction to add input parameters.

Properties

ParamCount

#
public override int ParamCount { get; }
Returns the number of input parameters already part of this component.
Overrides: GH_ParamManager.ParamCount

Indexers

Param

#
public override IGH_Param this[int index] { get; }
Gets the input parameter at the given index.
Parameters:
index (int)
Overrides: GH_ParamManager.Param

Methods

AddAngleParameter

#
public int AddAngleParameter(string name, string nickname, string description, GH_ParamAccess access, double default)
Add a floating point Number parameter to the input list of this component. The parameter will be aware that it is representing angles.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (double)A default value to store in the parameter Persistent Data.

AddAngleParameter

#
public int AddAngleParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<double> default)
Add a floating point Number parameter to the input list of this component. The parameter will be aware that it is representing angles.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<double>)A collection of default values to store in the parameter Persistent Data.

AddAngleParameter

#
public int AddAngleParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a floating point Number parameter to the input list of this component. The parameter will be aware that it is representing angles.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddArcParameter

#
public int AddArcParameter(string name, string nickname, string description, GH_ParamAccess access, Arc default)
Add a 3D Arc parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Arc)A default value to store in the parameter Persistent Data.

AddArcParameter

#
public int AddArcParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Arc parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddBooleanParameter

#
public int AddBooleanParameter(string name, string nickname, string description, GH_ParamAccess access, bool default)
Add a Boolean parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (bool)A default value to store in the parameter Persistent Data.

AddBooleanParameter

#
public int AddBooleanParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<bool> default)
Add a Boolean parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<bool>)A collection of default values to store in the parameter Persistent Data.

AddBooleanParameter

#
public int AddBooleanParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Boolean parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddBoxParameter

#
public int AddBoxParameter(string name, string nickname, string description, GH_ParamAccess access, Box default)
Add a 3D Box parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Box)A default value to store in the parameter Persistent Data.

AddBoxParameter

#
public int AddBoxParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Box parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddBrepParameter

#
public int AddBrepParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Brep parameter to the input list of this component. Brep parameters can handle both trimmed and untrimmed single or multi-faced Breps.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddCircleParameter

#
public int AddCircleParameter(string name, string nickname, string description, GH_ParamAccess access, Circle default)
Add a 3D Circle parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Circle)A default value to store in the parameter Persistent Data.

AddCircleParameter

#
public int AddCircleParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Circle parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddColourParameter

#
public int AddColourParameter(string name, string nickname, string description, GH_ParamAccess access, Color default)
Add an ARGB Colour parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Color)A default value to store in the parameter Persistent Data.

AddColourParameter

#
public int AddColourParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<Color> default)
Add an ARGB Colour parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<Color>)A collection of default values to store in the parameter Persistent Data.

AddColourParameter

#
public int AddColourParameter(string name, string nickname, string description, GH_ParamAccess access)
Add an ARGB Colour parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddComplexNumberParameter

#
public int AddComplexNumberParameter(string name, string nickname, string description, GH_ParamAccess access, GH_ComplexNumber default)
Add a Complex Number parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (GH_ComplexNumber)A default value to store in the parameter Persistent Data.

AddComplexNumberParameter

#
public int AddComplexNumberParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Complex Number parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddCultureParameter

#
public int AddCultureParameter(string name, string nickname, string description, GH_ParamAccess access, CultureInfo default)
Add a Culture parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (CultureInfo)A default value to store in the parameter Persistent Data.

AddCultureParameter

#
public int AddCultureParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Cultue parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddCurveParameter

#
public int AddCurveParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Curve parameter to the input list of this component. Curve parameters can handle all curve types (Lines, Polylines, Circles, Arcs, NurbsCurves etc.)
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddFieldParameter

#
public int AddFieldParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Field parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddGenericParameter

#
public int AddGenericParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Generic parameter to the input list of this component. Generic parameters can handle all types of data.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddGeometryParameter

#
public int AddGeometryParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a generic 3D Geometry parameter to the input list of this component. Geometry parameters can handle all types that represent actual shapes.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddGroupParameter

#
public int AddGroupParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Transform Group parameter to the input list of this component. Groups are collections of geometry that are transformed as one, they are not the same as Rhino groups.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddIntegerParameter

#
public int AddIntegerParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<int> default)
Add a Integer parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<int>)A collection of default values to store in the parameter Persistent Data.

AddIntegerParameter

#
public int AddIntegerParameter(string name, string nickname, string description, GH_ParamAccess access, int default)
Add a Integer parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (int)A default value to store in the parameter Persistent Data.

AddIntegerParameter

#
public int AddIntegerParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Integer parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddInterval2DParameter

#
public int AddInterval2DParameter(string name, string nickname, string description, GH_ParamAccess access)
Add an Interval2D (i.e. uv domain) parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddIntervalParameter

#
public int AddIntervalParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<Interval> default)
Add an Interval (i.e. numeric domain) parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<Interval>)A collection of default values to store in the parameter Persistent Data.

AddIntervalParameter

#
public int AddIntervalParameter(string name, string nickname, string description, GH_ParamAccess access, Interval default)
Add an Interval (i.e. numeric domain) parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Interval)A default value to store in the parameter Persistent Data.

AddIntervalParameter

#
public int AddIntervalParameter(string name, string nickname, string description, GH_ParamAccess access)
Add an Interval (i.e. numeric domain) parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddLineParameter

#
public int AddLineParameter(string name, string nickname, string description, GH_ParamAccess access, Line default)
Add a 3D Line parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Line)A default value to store in the parameter Persistent Data.

AddLineParameter

#
public int AddLineParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Line parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddMatrixParameter

#
public int AddMatrixParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Matrix parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddMeshFaceParameter

#
public int AddMeshFaceParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a topological MeshFace parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddMeshParameter

#
public int AddMeshParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Mesh parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddNumberParameter

#
public int AddNumberParameter(string name, string nickname, string description, GH_ParamAccess access, double default)
Add a floating point Number parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (double)A default value to store in the parameter Persistent Data.

AddNumberParameter

#
public int AddNumberParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<double> default)
Add a floating point Number parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<double>)A collection of default values to store in the parameter Persistent Data.

AddNumberParameter

#
public int AddNumberParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a floating point Number parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddParameter

#
public int AddParameter(IGH_Param param, string name, string nickname, string description, GH_ParamAccess access)
Generic parameter addition. If you cannot use one of the utility methods provided by this class, you can register a customized parameter using this method.
Parameters:
param (IGH_Param)The parameter to add.
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
Returns: Index of the newly added parameter.

AddParameter

#
public int AddParameter(IGH_Param param)
Generic parameter addition. If you cannot use one of the utility methods provided by this class, you can register a customized parameter using this method.
Parameters:
param (IGH_Param)The parameter to add.
Returns: Index of the newly added parameter.

AddPathParameter

#
public int AddPathParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Data Path parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddPlaneParameter

#
public int AddPlaneParameter(string name, string nickname, string description, GH_ParamAccess access, Plane default)
Add a 3D Plane parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Plane)A default value to store in the parameter Persistent Data.

AddPlaneParameter

#
public int AddPlaneParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Plane parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddPointParameter

#
public int AddPointParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<Point3d> default)
Register a new 3D point param with multiple default coordinates.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<Point3d>)A collection of default values to store in the parameter Persistent Data.

AddPointParameter

#
public int AddPointParameter(string name, string nickname, string description, GH_ParamAccess access, Point3d default)
Register a new 3D point param with a single default coordinate.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Point3d)A default value to store in the parameter Persistent Data.

AddPointParameter

#
public int AddPointParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Point parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddRectangleParameter

#
public int AddRectangleParameter(string name, string nickname, string description, GH_ParamAccess access, Rectangle3d default)
Add a 3D Rectangle parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Rectangle3d)A default value to store in the parameter Persistent Data.

AddRectangleParameter

#
public int AddRectangleParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Rectangle parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddScriptVariableParameter

#
public int AddScriptVariableParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Script Variable parameter to the input list of this component. Script variable parameters are used almost exclusively in VB/C#/Python components so you probably don't want this one.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddSubDParameter

#
public int AddSubDParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Sub-D parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddSurfaceParameter

#
public int AddSurfaceParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Surface parameter to the input list of this component. Surface parameters can handle both trimmed and untrimmed single-faced Breps.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddTextParameter

#
public int AddTextParameter(string name, string nickname, string description, GH_ParamAccess access, IEnumerable<string> default)
Add a Text parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (IEnumerable<string>)A collection of default values to store in the parameter Persistent Data.

AddTextParameter

#
public int AddTextParameter(string name, string nickname, string description, GH_ParamAccess access, string default)
Add a Text parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (string)A default value to store in the parameter Persistent Data.

AddTextParameter

#
public int AddTextParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Text parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddTimeParameter

#
public int AddTimeParameter(string name, string nickname, string description, GH_ParamAccess access, DateTime default)
Add a Time parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (DateTime)A default value to store in the parameter Persistent Data.

AddTimeParameter

#
public int AddTimeParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Time parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddTransformParameter

#
public int AddTransformParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Transformation parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

AddVectorParameter

#
public int AddVectorParameter(string name, string nickname, string description, GH_ParamAccess access, Vector3d default)
Add a 3D Vector parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.
default (Vector3d)A default value to store in the parameter Persistent Data.

AddVectorParameter

#
public int AddVectorParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Vector parameter to the input list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use GetData(), GetDataList() or GetDataTree() respectively.

FixUpParameter

protected void FixUpParameter(IGH_Param param, string name, string nickName, string description)
Assign some common fields to a parameter object.
inherited fromGH_Component.GH_ParamManager
Parameters:
param (IGH_Param)
name (string)
nickName (string)
description (string)

HideParameter

#
public override void HideParameter(int index)
Hide a specific input parameter. If the parameter at the given index implements IGH_PreviewObject then the Hidden flag will be set to True. Otherwise, nothing will happen.
Parameters:
index (int)Index of parameter to hide.
Overrides: GH_ParamManager.HideParameter

Register_2DIntervalParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_2DIntervalParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddInterval2DParameter()
Register a new two-dimensional Interval param
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_2DIntervalParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_2DIntervalParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddInterval2DParameter()
Register a new two-dimensional Interval param
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ArcParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ArcParam(string name, string nickname, string description, Arc default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddArcParameter()
Register a new 3D arc param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Arc)The default arc.
access (GH_ParamAccess)

Register_ArcParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ArcParam(string name, string nickname, string description, Arc default)
obsoleteThis method has been replaced with AddArcParameter()
Register a new 3D arc param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Arc)The default arc.

Register_ArcParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ArcParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddArcParameter()
Register a new 3D arc param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_ArcParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ArcParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddArcParameter()
Register a new 3D arc param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_BooleanParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BooleanParam(string name, string nickname, string description, bool default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddBooleanParameter()
Register a new Boolean primitive param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (bool)The default value.
access (GH_ParamAccess)

Register_BooleanParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BooleanParam(string name, string nickname, string description, bool default)
obsoleteThis method has been replaced with AddBooleanParameter()
Register a new Boolean primitive param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (bool)The default value.

Register_BooleanParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BooleanParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddBooleanParameter()
Register a new Boolean primitive param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_BooleanParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BooleanParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddBooleanParameter()
Register a new Boolean primitive param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_BoxParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BoxParam(string name, string nickname, string description, Box Default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddBoxParameter()
Register a new 3D box param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
Default (Box)The default box.
access (GH_ParamAccess)

Register_BoxParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BoxParam(string name, string nickname, string description, Box default)
obsoleteThis method has been replaced with AddBoxParameter()
Register a new 3D box param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Box)The default box

Register_BoxParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BoxParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddBoxParameter()
Register a new 3D box param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_BoxParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BoxParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddBoxParameter()
Register a new 3D box param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_BRepParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BRepParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddBrepParameter()
Register a new 3D Brep param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_BRepParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_BRepParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddBrepParameter()
Register a new 3D Brep param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_CircleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_CircleParam(string name, string nickname, string description, Circle default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddCircleParameter()
Register a new 3D circle param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Circle)The default circle.
access (GH_ParamAccess)

Register_CircleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_CircleParam(string name, string nickname, string description, Circle default)
obsoleteThis method has been replaced with AddCircleParameter()
Register a new 3D circle param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Circle)The default circle.

Register_CircleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_CircleParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddCircleParameter()
Register a new 3D circle param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_CircleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_CircleParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddCircleParameter()
Register a new 3D circle param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ColourParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ColourParam(string name, string nickname, string description, Color default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddColourParameter()
Register a new colour primitive param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Color)The default value.
access (GH_ParamAccess)

Register_ColourParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ColourParam(string name, string nickname, string description, Color default)
obsoleteThis method has been replaced with AddColourParameter()
Register a new colour primitive param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Color)The default value.

Register_ColourParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ColourParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddColourParameter()
Register a new colour primitive param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_ColourParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ColourParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddColourParameter()
Register a new colour primitive param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ComplexParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ComplexParam(string name, string nickname, string description, GH_ComplexNumber Default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddComplexNumberParameter()
Register a new Complex primitive param with a default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
Default (GH_ComplexNumber)The default value.
access (GH_ParamAccess)

Register_ComplexParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ComplexParam(string name, string nickname, string description, GH_ComplexNumber default)
obsoleteThis method has been replaced with AddComplexNumberParameter()
Register a new Complex primitive param with a default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (GH_ComplexNumber)

Register_ComplexParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ComplexParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddComplexNumberParameter()
Register a new Complex primitive param with no default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_ComplexParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ComplexParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddComplexNumberParameter()
Register a new Complex primitive param with no default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_CurveParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_CurveParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddCurveParameter()
Register a new 3D curve param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_CurveParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_CurveParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddCurveParameter()
Register a new 3D curve param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_DoubleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_DoubleParam(string name, string nickname, string description, double default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddNumberParameter()
Register a new Double primitive param with a default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (double)The default value.
access (GH_ParamAccess)

Register_DoubleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_DoubleParam(string name, string nickname, string description, double default)
obsoleteThis method has been replaced with AddNumberParameter()
Register a new Double primitive param with a default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (double)The default value.

Register_DoubleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_DoubleParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddNumberParameter()
Register a new Double primitive param with no default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_DoubleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_DoubleParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddNumberParameter()
Register a new Double primitive param with no default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_FieldParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_FieldParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddFieldParameter()
Register a new field parameter.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_FieldParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_FieldParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddFieldParameter()
Register a new field parameter.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_GenericParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_GenericParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddGenericParameter()
Register a new generic parameter (contains Object type). Generic parameters are sometimes not capable of duplicating data, so use these with caution.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_GenericParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_GenericParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddGenericParameter()
Register a new generic parameter (contains Object type). Generic parameters are sometimes not capable of duplicating data, so use these with caution.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_GeometryParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_GeometryParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddGeometryParameter()
Register a new 3D geometry param. This parameter is useful for transform components etc.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_GeometryParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_GeometryParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddGeometryParameter()
Register a new 3D geometry param. This parameter is useful for transform components etc.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_GroupParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_GroupParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddGroupParameter()
Register a new geometric group param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_GroupParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_GroupParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddGroupParameter()
Register a new geometric group param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_IntegerParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntegerParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddIntegerParameter()
Register a new integer primitive param. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_IntegerParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntegerParam(string name, string nickname, string description, int default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddIntegerParameter()
Register a new integer primitive param with a default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (int)The default value.
access (GH_ParamAccess)

Register_IntegerParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntegerParam(string name, string nickname, string description, int default)
obsoleteThis method has been replaced with AddIntegerParameter()
Register a new integer primitive param with a default value. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (int)The default value.

Register_IntegerParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntegerParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddIntegerParameter()
Register a new integer primitive param. This parameter type includes an expression parser.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_IntervalParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntervalParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddIntervalParameter()
Register a new Interval param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_IntervalParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntervalParam(string name, string nickname, string description, Interval default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddIntervalParameter()
Register a new OnInterval param with a default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Interval)The default value
access (GH_ParamAccess)

Register_IntervalParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntervalParam(string name, string nickname, string description, Interval default)
obsoleteThis method has been replaced with AddIntervalParameter()
Register a new OnInterval param with a default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Interval)The default value

Register_IntervalParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_IntervalParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddIntervalParameter()
Register a new Interval param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_LineParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_LineParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddLineParameter()
Register a new 3D line param with no default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_LineParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_LineParam(string name, string nickname, string description, Line default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddLineParameter()
Register a new 3D line param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Line)The default line.
access (GH_ParamAccess)

Register_LineParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_LineParam(string name, string nickname, string description, Line default)
obsoleteThis method has been replaced with AddLineParameter()
Register a new 3D line param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Line)The default line.

Register_LineParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_LineParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddLineParameter()
Register a new 3D line param with no default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_MatrixParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_MatrixParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddMatrixParameter()
Register a new matrix parameter.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_MatrixParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_MatrixParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddMatrixParameter()
Register a new matrix parameter.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_MeshFaceParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_MeshFaceParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddMeshFaceParameter()
Register a new 3D Mesh face param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_MeshFaceParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_MeshFaceParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddMeshFaceParameter()
Register a new 3D Mesh face param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_MeshParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_MeshParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddMeshParameter()
Register a new 3D Mesh param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_MeshParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_MeshParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddMeshParameter()
Register a new 3D Mesh param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_PathParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PathParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddPathParameter()
Register a new Data Structure path param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_PathParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PathParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddPathParameter()
Register a new Data Structure path param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_PlaneParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PlaneParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddPlaneParameter()
Register a new 3D vector param with no default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_PlaneParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PlaneParam(string name, string nickname, string description, Plane default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddPlaneParameter()
Register a new 3D vector param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Plane)The default plane.
access (GH_ParamAccess)

Register_PlaneParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PlaneParam(string name, string nickname, string description, Plane default)
obsoleteThis method has been replaced with AddPlaneParameter()
Register a new 3D vector param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Plane)The default plane

Register_PlaneParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PlaneParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddPlaneParameter()
Register a new 3D vector param with no default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_PointParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PointParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddPointParameter()
Register a new 3D point param with no default coordinate.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_PointParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PointParam(string name, string nickname, string description, IEnumerable<Point3d> default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddPointParameter()
Register a new 3D point param with multiple default coordinates.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (IEnumerable<Point3d>)The default coordinates.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_PointParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PointParam(string name, string nickname, string description, Point3d default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddPointParameter()
Register a new 3D point param with a single default coordinate.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Point3d)The default coordinate.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_PointParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PointParam(string name, string nickname, string description, Point3d default)
obsoleteThis method has been replaced with AddPointParameter()
Register a new 3D point param with a single default coordinate.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Point3d)The default coordinate

Register_PointParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_PointParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddPointParameter()
Register a new 3D point param with no default coordinate.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_RectangleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_RectangleParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddRectangleParameter()
Register a new 3D rectangle param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_RectangleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_RectangleParam(string name, string nickname, string description, Rectangle3d default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddRectangleParameter()
Register a new 3D rectangle param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Rectangle3d)The default rectangle.
access (GH_ParamAccess)

Register_RectangleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_RectangleParam(string name, string nickname, string description, Rectangle3d default)
obsoleteThis method has been replaced with AddRectangleParameter()
Register a new 3D rectangle param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Rectangle3d)The default rectangle.

Register_RectangleParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_RectangleParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddRectangleParameter()
Register a new 3D rectangle param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ScriptParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_ScriptParam(string name, string nickname, string description, bool bIsList = false)
obsoleteThis method has been replaced with AddScriptVariableParameter()
Register a new Script Variable param.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
bIsList (bool = false)If True, the parameter will be a list parameter which affects the data-matching algorithms

Register_StringParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_StringParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddTextParameter()
Register a new string primitive param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_StringParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_StringParam(string name, string nickname, string description, string default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddTextParameter()
Register a new string primitive param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (string)The default value.
access (GH_ParamAccess)

Register_StringParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_StringParam(string name, string nickname, string description, string default)
obsoleteThis method has been replaced with AddTextParameter()
Register a new string primitive param with a default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (string)The default value.

Register_StringParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_StringParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddTextParameter()
Register a new string primitive param with no default value.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_SurfaceParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_SurfaceParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddSurfaceParameter()
Register a new 3D surface param. Surfaces are Breps can thus be trimmed.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_SurfaceParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_SurfaceParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddSurfaceParameter()
Register a new 3D surface param. Surfaces are Breps can thus be trimmed.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_TransformParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_TransformParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddTransformParameter()
Register a new Transform param
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)

Register_TransformParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_TransformParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddTransformParameter()
Register a new Transform param
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_VectorParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_VectorParam(string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddVectorParameter()
Register a new 3D vector param with no default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_VectorParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_VectorParam(string name, string nickname, string description, Vector3d default, GH_ParamAccess access)
obsoleteThis method has been replaced with AddVectorParameter()
Register a new 3D vector param with a default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Vector3d)The default vector.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

Register_VectorParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_VectorParam(string name, string nickname, string description, Vector3d default)
obsoleteThis method has been replaced with AddVectorParameter()
Register a new 3D vector param with a default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
default (Vector3d)The default vector.

Register_VectorParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void Register_VectorParam(string name, string nickname, string description)
obsoleteThis method has been replaced with AddVectorParameter()
Register a new 3D vector param with no default value
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

RegisterParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void RegisterParam(IGH_Param new_param, string name, string nickname, string description, GH_ParamAccess access)
obsoleteThis method has been replaced with AddParameter()
Generic parameter registration. This class provides methods to register standard parameters, but if you have a custom type you have to use this generic function.
Parameters:
new_param (IGH_Param)The parameter to add.
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access type. This affects the DataMatching behaviour.

RegisterParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void RegisterParam(IGH_Param new_param, string name, string nickname, string description)
obsoleteThis method has been replaced with AddParameter()
Generic parameter registration. This class provides methods to register standard parameters, but if you have a custom type you have to use this generic function.
Remarks: The parameter will not be a list parameter
Parameters:
new_param (IGH_Param)The parameter to add.
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

RegisterParam

#
[EditorBrowsable(EditorBrowsableState.Never)] public void RegisterParam(IGH_Param param)
obsoleteThis method has been replaced with AddParameter()
Generic parameter registration. This class provides methods to register standard parameters, but if you have a custom type you have to use this generic function.
Parameters:
param (IGH_Param)The parameter to add.