GH_Component.GH_OutputParamManager

GH_Component.GH_ParamManagerReferences
protected class GH_Component.GH_OutputParamManager : GH_Component.GH_ParamManager
This class is used during Component construction to add output parameters.

Properties

ParamCount

#
public override int ParamCount { get; }
Returns the number of output parameters already part of this component.
Overrides: GH_ParamManager.ParamCount

Indexers

Param

#
public override IGH_Param this[int index] { get; }
Gets the output parameter at the given index.
Parameters:
index (int)
Overrides: GH_ParamManager.Param

Methods

AddArcParameter

#
public int AddArcParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Arc parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddBooleanParameter

#
public int AddBooleanParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Boolean parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddBoxParameter

#
public int AddBoxParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Box parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddBrepParameter

#
public int AddBrepParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Brep parameter to the output list of this component. Brep parameters can handle both trimmed and untrimmed single or multi-faced Breps.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddCircleParameter

#
public int AddCircleParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Circle parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddColourParameter

#
public int AddColourParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a ARGB Colour parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddComplexNumberParameter

#
public int AddComplexNumberParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Complex Number parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddCultureParameter

#
public int AddCultureParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Culture parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddCurveParameter

#
public int AddCurveParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Curve parameter to the output list of this component. Curve parameters can handle all curve types (Lines, Polylines, Circles, Arcs, NurbsCurves etc.)
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddFieldParameter

#
public int AddFieldParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Field parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddGenericParameter

#
public int AddGenericParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Generic parameter to the output list of this component. Generic parameters can handle all types of data.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddGeometryParameter

#
public int AddGeometryParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Geometry parameter to the output list of this component. Geometry parameters can handle all types that represent actual shapes.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddGroupParameter

#
public int AddGroupParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Transform Group parameter to the output list of this component. Groups are collections of geometry that are transformed as one, they are not the same as Rhino groups.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddIntegerParameter

#
public int AddIntegerParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Integer parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddInterval2DParameter

#
public int AddInterval2DParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Interval2D (i.e. uv domain) parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddIntervalParameter

#
public int AddIntervalParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Interval (i.e. numeric domain) parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddLineParameter

#
public int AddLineParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Line parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddMatrixParameter

#
public int AddMatrixParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Matrix parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddMeshFaceParameter

#
public int AddMeshFaceParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a topological MeshFace parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddMeshParameter

#
public int AddMeshParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Mesh parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddNumberParameter

#
public int AddNumberParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a floating point Number parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddParameter

#
public int AddParameter(IGH_Param param, string name, string nickname, string description, GH_ParamAccess access)
Generic parameter addition. If you cannot use one of the utility methods provided by this class, you can register a customized parameter using this method.
Parameters:
param (IGH_Param)The parameter to add.
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.
Returns: Index of the newly added parameter.

AddParameter

#
public int AddParameter(IGH_Param param)
Generic parameter addition. If you cannot use one of the utility methods provided by this class, you can register a customized parameter using this method.
Parameters:
param (IGH_Param)The parameter to add.
Returns: Index of the newly added parameter.

AddPathParameter

#
public int AddPathParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Data Path parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddPlaneParameter

#
public int AddPlaneParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Plane parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddPointParameter

#
public int AddPointParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Point parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddRectangleParameter

#
public int AddRectangleParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Rectangle parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddSubDParameter

#
public int AddSubDParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Sub-D parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddSurfaceParameter

#
public int AddSurfaceParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Surface parameter to the output list of this component. Surface parameters can handle both trimmed and untrimmed single-faced Breps.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddTextParameter

#
public int AddTextParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Text parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddTimeParameter

#
public int AddTimeParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Time parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddTransformParameter

#
public int AddTransformParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a Transformation parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

AddVectorParameter

#
public int AddVectorParameter(string name, string nickname, string description, GH_ParamAccess access)
Add a 3D Vector parameter to the output list of this component.
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear, single sentences are best.
access (GH_ParamAccess)Parameter access type. You must provide a correct access code in order to use SetData(), SetDataList() or SetDataTree() respectively.

FixUpParameter

protected void FixUpParameter(IGH_Param param, string name, string nickName, string description)
Assign some common fields to a parameter object.
inherited fromGH_Component.GH_ParamManager
Parameters:
param (IGH_Param)
name (string)
nickName (string)
description (string)

HideParameter

#
public override void HideParameter(int index)
Hide a specific output parameter. If the parameter at the given index implement IGH_PreviewObject then the Hidden flag will be set to True. Otherwise, nothing will happen.
Parameters:
index (int)Index of parameter to hide.
Overrides: GH_ParamManager.HideParameter

Register_2DIntervalParam

#
public void Register_2DIntervalParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new two-dimensional OnInterval parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_2DIntervalParam

#
public void Register_2DIntervalParam(string name, string nickname, string description)
Register a new two-dimensional OnInterval parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ArcParam

#
public void Register_ArcParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D arc parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_ArcParam

#
public void Register_ArcParam(string name, string nickname, string description)
Register a new 3D arc parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_BooleanParam

#
public void Register_BooleanParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Boolean primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_BooleanParam

#
public void Register_BooleanParam(string name, string nickname, string description)
Register a new Boolean primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_BoxParam

#
public void Register_BoxParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D box parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_BoxParam

#
public void Register_BoxParam(string name, string nickname, string description)
Register a new 3D box parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_BRepParam

#
public void Register_BRepParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D Brep parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_BRepParam

#
public void Register_BRepParam(string name, string nickname, string description)
Register a new 3D Brep parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_CircleParam

#
public void Register_CircleParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D circle parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_CircleParam

#
public void Register_CircleParam(string name, string nickname, string description)
Register a new 3D circle parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ColourParam

#
public void Register_ColourParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Colour primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_ColourParam

#
public void Register_ColourParam(string name, string nickname, string description)
Register a new Colour primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_ComplexParam

#
public void Register_ComplexParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Complex primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_ComplexParam

#
public void Register_ComplexParam(string name, string nickname, string description)
Register a new Complex primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_CurveParam

#
public void Register_CurveParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D curve parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_CurveParam

#
public void Register_CurveParam(string name, string nickname, string description)
Register a new 3D curve parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_DoubleParam

#
public void Register_DoubleParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Double primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_DoubleParam

#
public void Register_DoubleParam(string name, string nickname, string description)
Register a new Double primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_FieldParam

#
public void Register_FieldParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new field parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_FieldParam

#
public void Register_FieldParam(string name, string nickname, string description)
Register a new field parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_GenericParam

#
public void Register_GenericParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Generic (Object) parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_GenericParam

#
public void Register_GenericParam(string name, string nickname, string description)
Register a new Generic (Object) parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_GeometryParam

#
public void Register_GeometryParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D geometry parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_GeometryParam

#
public void Register_GeometryParam(string name, string nickname, string description)
Register a new 3D geometry parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_GroupParam

#
public void Register_GroupParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new geometric group parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_GroupParam

#
public void Register_GroupParam(string name, string nickname, string description)
Register a new geometric group parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_IntegerParam

#
public void Register_IntegerParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Integer primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_IntegerParam

#
public void Register_IntegerParam(string name, string nickname, string description)
Register a new Integer primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_IntervalParam

#
public void Register_IntervalParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Interval parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_IntervalParam

#
public void Register_IntervalParam(string name, string nickname, string description)
Register a new Interval parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_LineParam

#
public void Register_LineParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D line parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_LineParam

#
public void Register_LineParam(string name, string nickname, string description)
Register a new 3D line parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_MatrixParam

#
public void Register_MatrixParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new matrix parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_MatrixParam

#
public void Register_MatrixParam(string name, string nickname, string description)
Register a new matrix parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_MeshFaceParam

#
public void Register_MeshFaceParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D Mesh face parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_MeshFaceParam

#
public void Register_MeshFaceParam(string name, string nickname, string description)
Register a new 3D Mesh face parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_MeshParam

#
public void Register_MeshParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D Mesh parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_MeshParam

#
public void Register_MeshParam(string name, string nickname, string description)
Register a new 3D Mesh parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_PathParam

#
public void Register_PathParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Data Structure path parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_PathParam

#
public void Register_PathParam(string name, string nickname, string description)
Register a new Data Structure path parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_PlaneParam

#
public void Register_PlaneParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D plane parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_PlaneParam

#
public void Register_PlaneParam(string name, string nickname, string description)
Register a new 3D plane parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_PointParam

#
public void Register_PointParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D point parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_PointParam

#
public void Register_PointParam(string name, string nickname, string description)
Register a new 3D point parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_RectangleParam

#
public void Register_RectangleParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D rectangle parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_RectangleParam

#
public void Register_RectangleParam(string name, string nickname, string description)
Register a new 3D rectangle parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_StringParam

#
public void Register_StringParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new String primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_StringParam

#
public void Register_StringParam(string name, string nickname, string description)
Register a new String primitive parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_SurfaceParam

#
public void Register_SurfaceParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D surface parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_SurfaceParam

#
public void Register_SurfaceParam(string name, string nickname, string description)
Register a new 3D surface parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_TransformParam

#
public void Register_TransformParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new Transform parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_TransformParam

#
public void Register_TransformParam(string name, string nickname, string description)
Register a new Transform parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

Register_VectorParam

#
public void Register_VectorParam(string name, string nickname, string description, GH_ParamAccess access)
Register a new 3D vector parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

Register_VectorParam

#
public void Register_VectorParam(string name, string nickname, string description)
Register a new 3D vector parameter
Parameters:
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

RegisterParam

#
public void RegisterParam(IGH_Param param, GH_ParamAccess access)
Generic parameter registration. This class provides methods to register standard parameters, but if you have a special type you're in charge of setting it all up yourself.
Parameters:
param (IGH_Param)The parameter to add.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

RegisterParam

#
public void RegisterParam(IGH_Param param, string name, string nickname, string description, GH_ParamAccess access)
Generic parameter registration. This class provides methods to register standard parameters, but if you have a special type you're in charge of setting it all up yourself.
Parameters:
param (IGH_Param)The parameter to add
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.
access (GH_ParamAccess)Parameter access, you should set this field if you intend to output lists here.

RegisterParam

#
public void RegisterParam(IGH_Param param, string name, string nickname, string description)
Generic parameter registration. This class provides methods to register standard parameters, but if you have a special type you're in charge of setting it all up yourself.
Parameters:
param (IGH_Param)The parameter to add
name (string)The name of the parameter. Keep it short, single words are best.
nickname (string)The nickname of the parameter. Keep it short, single characters are best.
description (string)The description of the parameter. Be succinct but clear.

RegisterParam

#
public void RegisterParam(IGH_Param param)
Generic parameter registration. This class provides methods to register standard parameters, but if you have a special type you're in charge of setting it all up yourself.
Parameters:
param (IGH_Param)The parameter to add