Represents an ordered set of points connected by linear segments.

Polylines are closed if start and end points coincide.

Constructors

Polyline

#Since v5.0
Initializes a new empty polyline.
public Polyline()

Polyline

#Since v5.0
Initializes a new polyline from a collection of points.
public Polyline(
collection
Points to copy into the local vertex array.
)

Polyline

#Since v5.0
Initializes a new empty polyline with an initial capacity.
public Polyline(
initialCapacity
Number of vertices this polyline can contain without resizing.
)

Properties

BoundingBox

Even though this is a property, it is not a "fast" calculation. Every point is evaluated in order to get the bounding box of the list.
public BoundingBox BoundingBox { get; }
inherited fromPoint3dList

Capacity

Gets or sets the total number of elements the internal data structure can hold without resizing.
public int Capacity { get; set; }
inherited fromRhinoList<T>

Count

Gets the number of elements actually contained in the List.
public int Count { get; }
inherited fromRhinoList<T>

First

Gets or sets the first item in the list. This is synonymous to calling List[0].
public T First { get; set; }
inherited fromRhinoList<T>

IsClosed

#Since v5.0
Test a polyline to see if it is closed.
public bool IsClosed { get; }

IsValid

#Since v5.0
Gets a value that indicates whether this polyline is valid.

Valid polylines have at least one segment, no Invalid points and no zero length segments.

Closed polylines with only two segments are also not considered valid.

public bool IsValid { get; }

Last

Gets or sets the last item in the list. This is synonymous to calling List[Count-1].
public T Last { get; set; }
inherited fromRhinoList<T>

Length

#Since v5.0
Gets the total length of the polyline.
public double Length { get; }

NullCount

Gets the number of null references (Nothing in Visual Basic) in this list. If T is a ValueType, this property always return zero.
public int NullCount { get; }
inherited fromRhinoList<T>

SegmentCount

#Since v5.0
Gets the number of segments for this polyline.
public int SegmentCount { get; }

X

Returns an indexer with all X coordinates in this list.
public Point3dList.XAccess X { get; }
inherited fromPoint3dList

Y

Returns an indexer with all Y coordinates in this list.
public Point3dList.YAccess Y { get; }
inherited fromPoint3dList

Z

Returns an indexer with all Z coordinates in this list.
public Point3dList.ZAccess Z { get; }
inherited fromPoint3dList

Indexers

this[]

Gets or sets the element at the specified index.
public T this[
index
The zero-based index of the element to get or set.
] { get; set; }
inherited fromRhinoList<T>
The element at the specified index.

Methods

Add

Adds a Point3d to the end of the list with given x,y,z coordinates.
public void Add(
x,
The X coordinate.
y,
The Y coordinate.
z
The Z coordinate.
)
inherited fromPoint3dList

Add

Adds an object to the end of the List.
public void Add(
T
item
Item to append.
)
inherited fromRhinoList<T>

AddRange

Adds the elements of the specified collection to the end of the List.
public void AddRange(
collection
The collection whose elements should be added to the end of the List. The collection itself cannot be a null reference (Nothing in Visual Basic), but it can contain elements that are a null reference (Nothing in Visual Basic). Objects in collection which cannot be represented as T will throw exceptions.
)
inherited fromRhinoList<T>

AddRange

Adds the elements of the specified collection to the end of the List.
public void AddRange(
collection
The collection whose elements should be added to the end of the List. The collection itself cannot be a null reference (Nothing in Visual Basic), but it can contain elements that are a null reference (Nothing in Visual Basic), if type T is a reference type.
)
inherited fromRhinoList<T>

AsReadOnly

Constructs a read-only wrapper of this class.
public ReadOnlyCollection<T> AsReadOnly()
inherited fromRhinoList<T>
A wrapper.

BinarySearch

Searches the entire sorted List for an element using the specified comparer and returns the zero-based index of the element.
public int BinarySearch(
index,
The zero-based starting index of the range to search.
count,
The length of the range to search.
T
item,
The object to locate. The value can be a null reference (Nothing in Visual Basic) for reference types.
comparer
The IComparer(T) implementation to use when comparing elements. Or a null reference (Nothing in Visual Basic) to use the default comparer Comparer(T)::Default.
)
inherited fromRhinoList<T>
The zero-based index of item in the sorted List, if item is found; otherwise, a negative number that is the bitwise complement of the index of the next element that is larger than item or, if there is no larger element, the bitwise complement of Count.

BinarySearch

Searches the entire sorted List for an element using the specified comparer and returns the zero-based index of the element.
public int BinarySearch(
T
item,
The object to locate. The value can be a null reference (Nothing in Visual Basic) for reference types.
comparer
The IComparer(T) implementation to use when comparing elements. Or a null reference (Nothing in Visual Basic) to use the default comparer Comparer(T)::Default.
)
inherited fromRhinoList<T>
The zero-based index of item in the sorted List, if item is found; otherwise, a negative number that is the bitwise complement of the index of the next element that is larger than item or, if there is no larger element, the bitwise complement of Count.

BinarySearch

Searches the entire sorted List for an element using the default comparer and returns the zero-based index of the element.
public int BinarySearch(
T
item
The object to locate. The value can be a null reference (Nothing in Visual Basic) for reference types.
)
inherited fromRhinoList<T>
The zero-based index of item in the sorted List, if item is found; otherwise, a negative number that is the bitwise complement of the index of the next element that is larger than item or, if there is no larger element, the bitwise complement of Count.

BreakAtAngles

#Since v5.0
Breaks this polyline into sections at sharp kinks. Closed polylines will also be broken at the first and last vertex.
[ConstOperation] public Polyline[] BreakAtAngles(
angle
Angle (in radians) between adjacent segments for a break to occur.
)
An array of polyline segments, or null on error.

CenterPoint

#Since v5.0
Compute the center point of the polyline as the weighted average of all segments.
[ConstOperation] public Point3d CenterPoint()
The weighted average of all segments.

Clear

Removes all elements from the List.
public void Clear()
inherited fromRhinoList<T>

ClosestIndex

Finds the index of the point that is closest to a test point in this list.
public int ClosestIndex(
testPoint
point to compare against.
)
inherited fromPoint3dList
index of closest point in the list on success. -1 on error.

ClosestParameter

#Since v5.0
Gets the parameter along the polyline which is closest to a test-point.
[ConstOperation] public double ClosestParameter(
testPoint
Point to approximate.
)
The parameter along the polyline closest to testPoint.

ClosestPoint

#Since v5.0
Gets the point on the polyline which is closest to a test-point.
[ConstOperation] public Point3d ClosestPoint(
testPoint
Point to approximate.
)
The point on the polyline closest to testPoint.

CollapseShortSegments

#Since v5.0
Collapses all segments until none are shorter than tolerance. This function is significantly slower than DeleteShortSegments, since it recursively operates on the shortest segment. When a segment is collapsed the end-points are placed in the center of the segment.
public int CollapseShortSegments(
tolerance
Tolerance to use during collapsing.
)
The number of segments that were collapsed.

Contains

Determines whether an element is in the List.
public bool Contains(
T
item
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
)
inherited fromRhinoList<T>
true if item is found in the List; otherwise, false.

ConvertAll<TOutput>

Aggregates all results of a conversion function over this table into a new list.
public RhinoList<TOutput> ConvertAll<TOutput>(
Converter<T, TOutput>
converter
A conversion function that can transform from T to TOutput.
)
inherited fromRhinoList<T>
The new list.

CopyTo

Copies a range of elements from the List to a compatible one-dimensional array, starting at the specified index of the target array.
public void CopyTo(
index,
The zero-based index in the source List at which copying begins.
T[]
array,
The one-dimensional Array that is the destination of the elements copied from List. The Array must have zero-based indexing.
arrayIndex,
The zero-based index in array at which copying begins.
count
The number of elements to copy.
)
inherited fromRhinoList<T>

CopyTo

Copies the entire List to a compatible one-dimensional array, starting at the specified index of the target array.
public void CopyTo(
T[]
array,
The one-dimensional Array that is the destination of the elements copied from List. The Array must have zero-based indexing.
arrayIndex
The zero-based index in array at which copying begins.
)
inherited fromRhinoList<T>

CopyTo

Copies the entire List to a compatible one-dimensional array, starting at the beginning of the target array.
public void CopyTo(
T[]
array
The one-dimensional Array that is the destination of the elements copied from List. The Array must have zero-based indexing.
)
inherited fromRhinoList<T>

CreateByJoiningLines

#Since v8.0
Creates polylines by joining lines.
public static Polyline[] CreateByJoiningLines(
lines,
An array, a list or any enumerable of lines.
tolerance,
The threshold distance for joining lines.
splitAtIntersections
If true, splits lines at intersections.
)

CreateCircumscribedPolygon

#Since v6.10
Create a regular polygon circumscribe about a circle. The midpoints of the polygon's edges will be tangent to the circle.
public static Polyline CreateCircumscribedPolygon(
circle,
The circle.
sideCount
The number of sides
)
A closed polyline if successful, null otherwise.

CreateInscribedPolygon

#Since v6.10
Create a regular polygon inscribed in a circle. The vertices of the polygon will be on the circle.
public static Polyline CreateInscribedPolygon(
circle,
The circle.
sideCount
The number of sides
)
A closed polyline if successful, null otherwise.

CreateStarPolygon

#Since v6.10
Create a regular star polygon. The star begins at circle.PointAt(0) and the vertices alternate between being on circle and begin on a concentric circle of other_radius.
public static Polyline CreateStarPolygon(
circle,
The circle.
radius,
The radius of other circle.
cornerCount
The number of corners on the circle. There will be 2*cornerCount sides and 2*cornerCount vertices.
)
A closed polyline if successful, null otherwise.

DeleteShortSegments

#Since v5.0
Removes all points that are closer than tolerance to the previous point.

Start and end points are left intact.

public int DeleteShortSegments(
tolerance
Vertices closer together than tolerance will be removed.
)
Number of points (and segments) removed.

Duplicate

#Since v6.0
Returns a deep copy of this polyline instance.
[ConstOperation] public Polyline Duplicate()
The duplicated polyline.

Equals

Overrides the default object equality to compare lists by value.
public override bool Equals(
obj
)
inherited fromPoint3dList
True is objects are exactly equal in value.
Object.Equals

Equals

Determines if the point lists are exactly equal.
public bool Equals()
inherited fromPoint3dList
True is objects are exactly equal in value.

Exists

Determines whether the List contains elements that match the conditions defined by the specified predicate.
public bool Exists(
match
The Predicate(T) delegate that defines the conditions of the elements to search for.
)
inherited fromRhinoList<T>
true if the List contains one or more elements that match the conditions defined by the specified predicate; otherwise, false.

Find

Searches for an element that matches the conditions defined by the specified predicate, and returns the first occurrence within the entire List.
public T Find(
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The first element that matches the conditions defined by the specified predicate, if found; otherwise, the default value for type T.

FindAll

Retrieves all the elements that match the conditions defined by the specified predicate.
public RhinoList<T> FindAll(
match
The Predicate(T) delegate that defines the conditions of the elements to search for.
)
inherited fromRhinoList<T>
A ON_List(T) containing all the elements that match the conditions defined by the specified predicate, if found; otherwise, an empty ON_List(T).

FindIndex

Searches for an element that matches the conditions defined by the specified predicate, and returns the zero-based index of the first occurrence within the range of elements in the List that extends from the specified index to the last element.
public int FindIndex(
startIndex,
The zero-based starting index of the search.
count,
The number of elements in the section to search.
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The zero-based index of the first occurrence of an element that matches the conditions defined by match, if found; otherwise, -1.

FindIndex

Searches for an element that matches the conditions defined by the specified predicate, and returns the zero-based index of the first occurrence within the entire List.
public int FindIndex(
startIndex,
The zero-based starting index of the search.
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The zero-based index of the first occurrence of an element that matches the conditions defined by match, if found; otherwise, -1.

FindIndex

Searches for an element that matches the conditions defined by the specified predicate, and returns the zero-based index of the first occurrence within the entire List.
public int FindIndex(
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The zero-based index of the first occurrence of an element that matches the conditions defined by match, if found; otherwise, -1.

FindLast

Searches for an element that matches the conditions defined by the specified predicate, and returns the last occurrence within the entire List.
public T FindLast(
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The last element that matches the conditions defined by the specified predicate, if found; otherwise, the default value for type T.

FindLastIndex

Searches for an element that matches the conditions defined by the specified predicate, and returns the zero-based index of the last occurrence within the entire List.
public int FindLastIndex(
startIndex,
The zero-based starting index of the backward search.
count,
The number of elements in the section to search.
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The zero-based index of the last occurrence of an element that matches the conditions defined by match, if found; otherwise, -1.

FindLastIndex

Searches for an element that matches the conditions defined by the specified predicate, and returns the zero-based index of the last occurrence within the entire List.
public int FindLastIndex(
startIndex,
The zero-based starting index of the backward search.
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The zero-based index of the last occurrence of an element that matches the conditions defined by match, if found; otherwise, -1.

FindLastIndex

Searches for an element that matches the conditions defined by the specified predicate, and returns the zero-based index of the last occurrence within the entire List.
public int FindLastIndex(
match
The Predicate(T) delegate that defines the conditions of the element to search for.
)
inherited fromRhinoList<T>
The zero-based index of the last occurrence of an element that matches the conditions defined by match, if found; otherwise, -1.

ForEach

Performs the specified action on each element of the List.
public void ForEach(
Action<T>
action
The Action(T) delegate to perform on each element of the List.
)
inherited fromRhinoList<T>

GetEnumerator

Constructs an enumerator that is capable of iterating over all items in this list.
public IEnumerator<T> GetEnumerator()
inherited fromRhinoList<T>
The new enumerator.

GetHashCode

Creates a hash code for this object.
public override int GetHashCode()
inherited fromPoint3dList
An int that serves as an hash code. This is currently a XOR of all doubles, XORed in line.

GetRange

Constructs a shallow copy of a range of elements in the source List.
public RhinoList<T> GetRange(
index,
The zero-based List index at which the range starts.
count
The number of elements in the range.
)
inherited fromRhinoList<T>
A shallow copy of a range of elements in the source List.

GetSegments

#Since v5.0
Constructs an array of line segments that make up the entire polyline.
[ConstOperation] public Line[] GetSegments()
An array of line segments or null if the polyline contains fewer than 2 points.

IndexOf

Searches for the specified object and returns the zero-based index of the first occurrence within the range of elements in the List that starts at the specified index and contains the specified number of elements.
public int IndexOf(
T
item,
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
index,
The zero-based starting index of the search.
count
The number of elements in the section to search.
)
inherited fromRhinoList<T>
The zero-based index of the first occurrence of item within the entire List, if found; otherwise, -1.

IndexOf

Searches for the specified object and returns the zero-based index of the first occurrence within the range of elements in the List that extends from the specified index to the last element.
public int IndexOf(
T
item,
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
index
The zero-based starting index of the search.
)
inherited fromRhinoList<T>
The zero-based index of the first occurrence of item within the entire List, if found; otherwise, -1.

IndexOf

Searches for the specified object and returns the zero-based index of the first occurrence within the entire List.
public int IndexOf(
T
item
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
)
inherited fromRhinoList<T>
The zero-based index of the first occurrence of item within the entire List, if found; otherwise, -1.

Insert

Inserts an element into the List at the specified index.
public void Insert(
index,
The zero-based index at which item should be inserted.
T
item
The object to insert. The value can be a null reference (Nothing in Visual Basic) for reference types.
)
inherited fromRhinoList<T>

InsertRange

Inserts the elements of a collection into the List at the specified index.
public void InsertRange(
index,
The zero-based index at which the new elements should be inserted.
collection
The collection whose elements should be inserted into the List. The collection itself cannot be a null reference (Nothing in Visual Basic), but it can contain elements that are a null reference (Nothing in Visual Basic), if type T is a reference type.
)
inherited fromRhinoList<T>

IsClosedWithinTolerance

#Since v5.0
Test a polyline to see if it is closed.
public bool IsClosedWithinTolerance(
tolerance
The tolerance.
)
Returns true if polyline has 4 or more points, the distance between the start and end points is <= tolerance, and there is a point in the polyline whose distance from the start and end points is > tolerance.

IsConvexLoop

#Since v8.28
Determines if a polyline is convex.
public bool IsConvexLoop(
strictlyConvex
If false, collinear segments are considered convex.
)
True if the polyline is a closed, convex loop.

LastIndexOf

Searches for the specified object and returns the zero-based index of the last occurrence within the range of elements in the List that contains the specified number of elements and ends at the specified index.
public int LastIndexOf(
T
item,
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
index,
The zero-based starting index of the backward search.
count
The number of elements in the section to search.
)
inherited fromRhinoList<T>
The zero-based index of the last occurrence of item within the entire the List, if found; otherwise, -1.

LastIndexOf

Searches for the specified object and returns the zero-based index of the last occurrence within the range of elements in the List that extends from the first element to the specified index.
public int LastIndexOf(
T
item,
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
index
The zero-based starting index of the backward search.
)
inherited fromRhinoList<T>
The zero-based index of the last occurrence of item within the entire the List, if found; otherwise, -1.

LastIndexOf

Searches for the specified object and returns the zero-based index of the last occurrence within the entire List.
public int LastIndexOf(
T
item
The object to locate in the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
)
inherited fromRhinoList<T>
The zero-based index of the last occurrence of item within the entire the List, if found; otherwise, -1.

MergeColinearSegments

#Since v6.3
Merge co-linear consecutive segments in a polyline. This method will automatically remove any zero-length segments as well.
public int MergeColinearSegments(
angleTolerance,
The angle tolerance between adjacent segments for collinearity test.
includeSeam
If true, the seam point of a closed polyline will be moved forwards if it is collinear too.
)
Number of segments removed from the entire polyline.

PointAt

#Since v5.0
Gets the point on the polyline at the given parameter. The integer part of the parameter indicates the index of the segment.
[ConstOperation] public Point3d PointAt(
t
Polyline parameter.
)
The point on the polyline at t.

ReduceSegments

#Since v5.0
Constructs a reduction of this polyline by recursively removing the least significant segments.
public int ReduceSegments(
tolerance
Tolerance for reduction. Whenever a vertex of the polyline is more significant than tolerance, it will be included in the reduction.
)
The number of vertices that disappeared due to reduction.

RemapIndex

Remap an index in the infinite range onto the List index range.
public int RemapIndex(
index
Index to remap.
)
inherited fromRhinoList<T>
Remapped index.

Remove

Removes the first occurrence of a specific object from the List.
public bool Remove(
T
item
The object to remove from the List. The value can be a null reference (Nothing in Visual Basic) for reference types.
)
inherited fromRhinoList<T>
true if item is successfully removed; otherwise, false. This method also returns false if item was not found in the List.

RemoveAll

Removes the all the elements that match the conditions defined by the specified predicate.
public int RemoveAll(
match
The Predicate(T) delegate that defines the conditions of the elements to remove.
)
inherited fromRhinoList<T>
The number of elements removed from the List.

RemoveAt

Removes the element at the specified index of the List.
public void RemoveAt(
index
The zero-based index of the element to remove.
)
inherited fromRhinoList<T>

RemoveNearlyEqualSubsequentPoints

#Since v7.1
Removes one copy of a point that is equal to the previous or later point, by an absolute tolerance factor.
public void RemoveNearlyEqualSubsequentPoints(
tolerance
)

RemoveNulls

Removes all elements from the List that are null references (Nothing in Visual Basic). This function will not do anything if T is not a Reference type.
public int RemoveNulls()
inherited fromRhinoList<T>
The number of nulls removed from the List.

RemoveRange

Removes a range of elements from the List.
public void RemoveRange(
index,
The zero-based starting index of the range of elements to remove.
count
The number of elements to remove.
)
inherited fromRhinoList<T>

Reverse

Reverses the order of the elements in the entire List.
public void Reverse()
inherited fromRhinoList<T>

Reverse

Reverses the order of the elements in the specified range.
public void Reverse(
index,
The zero-based starting index of the range to reverse.
count
The number of elements in the range to reverse.
)
inherited fromRhinoList<T>

SegmentAt

#Since v5.0
Gets the line segment at the given index.
[ConstOperation] public Line SegmentAt(
index
Index of segment to retrieve.
)
Line segment at index or Line.Unset on failure.

SetAllX

Set all the X values for the points to a single value
public void SetAllX(
xValue
)
inherited fromPoint3dList

SetAllY

Set all the Y values for the points to a single value
public void SetAllY(
yValue
)
inherited fromPoint3dList

SetAllZ

Set all the Z values for the points to a single value
public void SetAllZ(
zValue
)
inherited fromPoint3dList

Smooth

#Since v5.0
Smoothen the polyline segments by averaging adjacent vertices. Smoothing requires a polyline with exclusively valid vertices.
public bool Smooth(
amount
Amount to smooth. Zero equals no smoothing, one equals complete smoothing.
)
true on success, false on failure.

Sort

Sorts the elements in the entire List using the default comparer.
public void Sort()
inherited fromRhinoList<T>

Sort

Sorts the elements in the entire list using the specified comparer.
public void Sort(
comparison
The System.Comparison(T) to use when comparing elements.
)
inherited fromRhinoList<T>

Sort

Sort this list based on a list of numeric keys of equal length. The keys array will not be altered.
public void Sort(
keys
Numeric keys to sort with.
)
inherited fromRhinoList<T>
Remarks: This function does not exist on the DotNET List class. David thought it was a good idea.

Sort

Sorts the elements in the entire list using the specified System.Comparison(T)
public void Sort(
comparer
The IComparer(T) implementation to use when comparing elements, or a null reference (Nothing in Visual Basic) to use the default comparer Comparer(T).Default.
)
inherited fromRhinoList<T>

Sort

Sorts the elements in a range of elements in list using the specified comparer.
public void Sort(
index,
The zero-based starting index of the range to sort.
count,
The length of the range to sort.
comparer
The IComparer(T) implementation to use when comparing elements, or a null reference (Nothing in Visual Basic) to use the default comparer Comparer(T).Default.
)
inherited fromRhinoList<T>

Sort

Sort this list based on a list of numeric keys of equal length. The keys array will not be altered.
public void Sort(
int[]
keys
Numeric keys to sort with.
)
inherited fromRhinoList<T>
Remarks: This function does not exist on the DotNET List class. David thought it was a good idea.
Explicit

ICloneable.Clone

#

TangentAt

#Since v5.0
Gets the unit tangent vector along the polyline at the given parameter. The integer part of the parameter indicates the index of the segment.
[ConstOperation] public Vector3d TangentAt(
t
Polyline parameter.
)
The tangent along the polyline at t.

ToArray

Constructs an array that contains all items in this list.
public T[] ToArray()
inherited fromRhinoList<T>
An array containing all items in this list.

ToNurbsCurve

#Since v5.0
Constructs a nurbs curve representation of this polyline.
[ConstOperation] public NurbsCurve ToNurbsCurve()
A Nurbs curve shaped like this polyline or null on failure.

ToPolylineCurve

#Since v6.0
Constructs a polyline curve representation of this polyline.
[ConstOperation] public PolylineCurve ToPolylineCurve()
A curve shaped like this polyline or null on failure.

Transform

Applies a transform to all the points in the list.
public void Transform(
Transform
xform
Transform to apply.
)
inherited fromPoint3dList

TriangulateClosedPolyline

#Since v5.0
Attempts to create a list of triangles which represent a triangulation of a closed polyline
[ConstOperation] public MeshFace[] TriangulateClosedPolyline()

Trim

#Since v5.0
Constructs a polyline out of a parameter sub-domain in this curve.
[ConstOperation] public Polyline Trim(
domain
The sub-domain of the polyline. The integer part of the domain parameters indicate the index of the segment.
)
The polyline as defined by the sub-domain, or null on failure.

TrimExcess

Sets the capacity to the actual number of elements in the List, if that number is less than a threshold value.
public void TrimExcess()
inherited fromRhinoList<T>
Remarks: This function differs from the DotNET implementation of List<T> since that one only trims the excess if the excess exceeds 10% of the list length.

TrueForAll

Determines whether every element in the List matches the conditions defined by the specified predicate.
public bool TrueForAll(
match
The Predicate(T) delegate that defines the conditions to check against the elements.
)
inherited fromRhinoList<T>
true if every element in the List matches the conditions defined by the specified predicate; otherwise, false. If the list has no elements, the return value is true.